Can You Add Shock And PH Up At The Same Time?

How long after adding pH up can you add shock?

8) How long after adding chemicals can I swim.

Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals.

Wait about 20 minutes, and you are free to swim.

We suggest adding algaecide, Super Erace, and shock at night, after everyone is out of the pool..

Can I add pH increaser and alkalinity increaser at the same time?

To raise pH and Alkalinity at the same time, start with Alkalinity, and add enough Increaser to raise Alkalinity to 100 ppm. … Once you get your pH levels between 7.2 and 7.5 and your total alkalinity between 60 and 120 ppm you can move on to working on the calcium hardness and chlorine levels.

How long do I wait to add algaecide after shock?

24 hoursYour chlorine levels won’t return to normal right after you shock your pool anyway, so we recommend waiting at least 24 hours to add algaecide. When adding algaecide to your pool, make sure you add the correct amount.

What happens if pH is too low in pool?

When alkalinity falls, it is more difficult to maintain a stable pH. Plus, a lower pH and alkalinity of your pool water creates several negative effects, from itchy skin and stinging eyes for swimmers to corrosion of your pool ladders, liner, or other components.

Is pool shock the same as stabilizer?

Also known as pool conditioner, chlorine pool stabilizer, or chlorine stabilizer you can buy this chemical additive as either liquid or granules. It’s also often called cyanuric acid, a chemical that may be included in chlorine tablets or sticks (called trichlor) or shock (called dichlor).

Can you shock your pool and add stabilizer at the same time?

You can even get it mixed in with chlorine tablets or sticks, called trichlor, and in chlorine shock, called dichlor. These combination products are referred to as stabilized chlorine because the stabilizer is mixed right in with the sanitizer, saving you the trouble of measuring and adding them separately.

Why is my pool still green after shocking it?

When pool chemicals are not properly maintained it is easy for pH levels to get out of whack quickly leading to a green pool. If you have already shocked your pool and taken pH level samples you may still need to add stabilizers or phosphate removers.

What happens if you go in a pool that was just shocked?

Chlorine- based shock contains high levels of pH and will alter both your pH and chlorine levels in the pool. Chlorine- free shock has a neutral pH and will not affect any of your other chemical levels. … And in turn, it will delay your swimmers from returning to the pool.

How do you fix low pH and high alkalinity?

To lower pH and total alkalinity, use a strong acid such as muriatic acid, sulfuric acid, or sodium bisulfate, all of which lower both pH and TA, but at different rates. You need to use an accurate water test kit that can give you correct readings.

How often should you add shock to a pool?

You don’t want to wait for a bad smell or itchy eyes to happen before you shock your pool. We recommend shocking your pool once a week, or at least once every other week to properly maintain your water chemistry. The more often you use the pool, the more often you should reach for the swimming pool shock.

Can you put stabilizer directly in pool?

How to add stabilizer to your pool. Most manufacturers say to add your CYA to a bucket of warm water first and others say you can pour it directly into the pool.

Should I raise pH or alkalinity first?

Check Total Alkalinity (TA) first, then adjust for proper pH range. Proper TA will buffer pH, that is, it will help to prevent pH fluctuations. Use fresh, high quality test strips. Excessively high bromine or chlorine levels can result in false pH and TA readings.

Does shock raise pH?

Chlorine based pool shock (Calcium Hypochlorite) has a high pH, and will naturally raise the pH level of your swimming pool water, in addition to changing your chlorine level. Chlorine free shock has a neutral pH, and will not affect any of your pool chemical levels.

How long after adding chlorine can I add acid?

It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first! Muriatic acid can create a hot spot of acid in the water that could potentially burn or irritate your skin. It is best to wait 30 minutes after adding it to your pool.

Should I add acid or chlorine first?

The addition of the chlorine or salt will give you the pH increase. It’s not worth it to add an alkali one day, to raise the alkalinity or the pH, then an acid the next when neither was necessary!

Will Shocking pool lower pH?

Pool shock. Shocking your pool is important, but if you’re using cal-hypo (calcium hypochlorite), it can raise your pool’s pH levels. Don’t stop shocking your pool, but do test all your chemistry levels consistently, especially after shocking.

Can I add shock and algaecide at the same time?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.