What Is A Good Watt Per Kg?

What should my watts per kg be?

To work out your power-to-weight ratio figure, simply divide your maximum power output (in watts) by your body mass in kilograms (kg).

For example, an 80kg rider with a maximum sustainable power output of 280 watts has a power-to-weight ratio of 3.5 watts per kilo (commonly abbreviated as 3.5W/kg or 3.5W.

kg-1).

>>>.

What is a good power to weight ratio for a cyclist?

This means you can generate 4.05 watts for every kilogram of body weight. A power to weight ratio of 4 to 4.5 is equivalent to a competitive Category 2 racer. A power to weight ratio of 5-6 would put you in the range of a Category 1 elite professional (according to Andy Coggan’s power profiling chart).

What’s a good FTP?

Average recreational cyclists would be about 2.5-3.0 Watts/Kg for FTP. People who race regularly may be 3.0-3.75. You get above 3.75-4.25 and those are local elite racers. Anything over 4.25 is domestic pro and it goes up from there.

What is a good FTP for a triathlete?

An FTP of 340 to 360 watts is typical for the top male riders. It is important to note that FTP in relation to the athlete’s weight is the best way to compare any two riders.

What is a good FTP for a cyclist?

How do you go about improving FTP?ZonePercentage of FTPUse for256-75%Long, endurance rides376-90%Tempo rides aimed at improving endurance at high effort491-105%8-30 mintue intervals focused on improving FTP5106-120%3-8 minute ‘V02 max’ intervals3 more rows•Mar 23, 2020

What is a pro cyclist FTP?

FTP is the acronym for Functional Threshold Power. In theory this is the max power that you can sustain for an hour’s riding. Once you know this number, it’s then used to set your training zones and help you gauge your riding efforts. … Because it comes from a power meter reading, the FTP is measured in watts.

How many watts is 20 mph?

Cycling PowerSpeed – kmh (mph)Power (watts)Increase in power needed to increase speed by 2.5kmh22.5 (14)952025 (15.6)1202527.5 (17.2)1482830 (18.7)180325 more rows

How much is sweet spot a week?

Once you’ve built up a base level of fitness, both Bottrill and Rowe recommend including one or two sweetspot sessions per week in a training plan. If you are new to structured training, Bottrill and Rowe advise starting with five or ten-minute sweetspot intervals, before working up to 20 minutes.

What is a good average wattage cycling?

200 to 300 wattsMost pro cyclists produce about 200 to 300 watts on average during a four-hour tour stage.

What is a reasonable FTP?

47% of people have an FTP below 3.2W/kg. 45% of people have an FTP of 3.4W/kg or more. 8% of people have an FTP between 3.2W/kg and 3.4W/kg.

How accurate is strava Watts?

Given measured power data, Strava said that my average power for the whole ride was 164 watts and produced a total of 1,233 kilojoules of energy. Without direct measurements, Strava estimated that my average power was 177 watts and total energy production was 1,328 kilojoules. That’s an overall power error of 7.9%.

How can I increase my cycling wattage?

5 Simple Ways to Increase Bike PowerRide in bigger gears. Riding in bigger gears at the same cadence in a particular set of conditions makes for a consistently higher power output. … Ride uphill. … Ride into headwinds. … Use block training. … Follow the 75-percent rule.

What is a good FTP for a beginner cyclist?

Overton says the average newer rider with some fitness will hover in the 2.0 range, while top cyclists in the world hover around 7.0. That number won’t affect your training at all, but it’s a good way to see how you compare to other riders.

How quickly can I increase my FTP?

In many cases, I recommend adding 2-3 recovery weeks spaced throughout this time. So for most athletes coming off a period of reduced or less focused training, it takes around 10 weeks to begin to see FTP gains.

How do you do a 20 minute FTP test?

The protocol itself is actually quite simple: after a substantial warmup, start a lap on your head unit, and smash it for 20 minutes, as hard as you can. The average power recorded for the 20 minute test is multiplied by . 95 to estimate what your “hour of power” (or Threshold Power) would be.